Effect of plasticizer on the characteristics of molecularly imprinted polymer based potentiometric sensor for propranolol

Authors

  • Olga V. Gurtova Oles Honchar Dnipropetrovsk National University, Ukraine https://orcid.org/0000-0002-7289-8484
  • Lei Ye Chemical Center, Lund University, Sweden
  • Fedor A. Chmilenko Oles Honchar Dnipropetrovsk National University, Ukraine

DOI:

https://doi.org/10.15421/081302

Keywords:

plasticizer, molecular imprinted polymer, propranolol, potentiometric sensor, MIP-based sensor, MIP microspheres

Abstract

The effect of different plasticizers on the performance and selectivity coefficient of molecularly imprinted polymer (MIP) based potentiometric sensor in mixed non-aqueous mediums was first investigated. The research was undertaken for propanolol imprinted MIP. Plasticizers (di-n-octyl phthalate (DOP), dibutyl phthalate (DBP) and dioctyl sebacate (DOS)) were used in MIP based sensors for potentiometric determination of propranolol, as well as to change the resistance of the sensing polyvinylchloride membrane and to improve the detection limit and selectivity of the electrodes. For propranolol-selective sensors, the nature of plasticizer influences distribution of MIP particles in polyvinylchloride, slope of electrode function, linear range and selectivity coefficients. The applicability of the proposed sensors was tested by potentiometric propranolol determination in aqueous modeling solution with the use of tablets of pharmaceutical formulation.        

Author Biographies

Olga V. Gurtova, Oles Honchar Dnipropetrovsk National University

        

Lei Ye, Chemical Center, Lund University

        

Fedor A. Chmilenko, Oles Honchar Dnipropetrovsk National University

        

References

Bratov, A., Abramova, N., Ipatov, A. Recent trends in potentiometric sensor arrays – A review. Analytica Chimica Acta, 2010, vol. 678, p. 149-159.

Yu, R.Q., Zhang, Z.R., Shen, G.L. Potentiometric sensors: aspects orf the recent development. Sensors and Actuators B, 2000, vol. 65, p. 150-153.

Moody, G.J., Thomas, J.D.R. 1978 In: H. Freiser (Ed.) Ion-Selective Electrodes in Analytical Chemistry, vol. 1. Plenum.

PVC Technology, 4th Ed., Titow, W.V., Ed., Elsevier Applied Science, Barking, England, 1984, 1264 p.

Gather, R., Muller, H., Plastic Additives Handbook, 2nd ed., Hanser, Munich, 1987, 790 p.

Rabello, M. Aditivacao de Polimeros, Artliber, Sao Paulo 2000.

Janata, J. Principles of Chemical Sensors. Springer, 2009, 369 p.

Prasada Rao, T., Kala, R. Potentiometric transducer based biomimetic sensors for priority envirotoxic markers – An overview. Talanta, 2008, vol. 76, p. 485-496.

Metilda, P., Prasad, K., Kala, R., Gladis, J.M., Prasada Rao, T., Naidu, G.R.K. Ion imprinted polymer based sensor for monitoring toxic uranium in environmental samples. Analytica Chimica Acta, 2007, vol. 582, no. 1, p. 147-153.

Prasad K., Kala R., Prasada Rao T., Naidu G.R.K. Ion imprinted polymer based ion-selective electrode for the trace determination of dysprosium(III) ions. Analytica Chimica Acta, 2006, vol. 566, no. 1, p. 69-74.

Liang, R., Zhang, R., Song, W., Hu, X., Qin, W. Potentiometric sensor based on an ion-imprinted polymer for determination of copper. Sensor letters, 2011, vol. 9, no. 2, p. 557-562.

Prasad, K., Prathish, K.P., Mary Gladis, J., Naidu, G.R.K., Prasada Rao, T. Molecularly imprinted polymer (biomimetic) based potentiometric sensor for atrazine. Sensors and Actuators B: Chemical, 2007, vol. 123, no. 1, p. 65-70.

Kamel, A.H., Moreira, F.T.C., Almeida, S.A.A., Sales, M.G.F. Novel potentiometric sensors of molecular imprinted polymers for specific binding of chlormequat. Electroanalysis, 2008, vol. 20, no. 2, p. 194-202.

Moreira, F.T.C., Kamel, A.H., Guerreiro, R.L., Azevedo, V., Sales, M.G.F. New potentiometric sensors based on two competitive recognition sites for determining tetracycline residues using flow-through system. Procedia Engineering, 2010, vol. 5, p. 1200-1203.

Guerreiro J.R.L., Freitas V., Sales M.G.F. New sensing materials of molecularly-imprinted polymers for the selective recognition of Chlortetracycline. Microchemical Journal, 2011, vol. 97, no. 2, p. 173-181.

Moreira, F.T.C., Kamel, A.H., Guerreiro, J.R.L., Sales, M.G.F. Man-tailored biomimetic sensor of molecularly imprinted materials for the potentiometric measurement of oxytetracycline. Biosensors and Bioelectronics, 2010, vol. 26, no. 2, p. 566-574.

Kamel, A.H., Moreira, F.T.C., Sales, M.G. Biomimetic sensor potentiometric system for doxycycline antibiotic using a molecularly imprinted polymer as an artificial recognition element. Sensor letters, 2011, vol. 9, no. 5, p. 1654-1660.

Guerreiro, J.R.L., Sales, M.G.F., Moreira, F.T.C., Rebelo, T.S.R. Selective recognition in potentiometric transduction of amoxicillin by molecularly-imprinted materials. Eur. Food Res. Technol., 2011, vol. 232, no. 1, p. 39-50.

Oliveira, H.M.V., Moreira, F.T.C., Sales, M.G.F. Ciprofloxacin-imprinted polymeric receptors as ionophores for potentiometric transduction. Electrochimica Acta, 2011, vol. 56, p. 2017-2023.

Alizadeh, T., Akhoundian, M. A novel potentiometric sensor for promethazine based on a molecularly imprinted polymer (MIP): The role of MIP structure on the sensor performance. Electrochimica Acta, 2010, vol. 55, no 10, p. 3477-3485.

Moreira, F.T.S., Sales, M.G.F. Biomimetic sensors of molecularly-imprinted polymers for Chlorpromazine determination. Material Science and Engineering C, 2011, vol. 31, p. 1121-1128.

Sadeghi, S., Fathi, F., Abbasifar, J. Potentiometric sensing of levamisole hydrochloride based on molecularly imprinted polymer. Sensors and Actuators B: Chemical, 2007, vol. 122, no. 1, p. 158-164.

Arvand, M., Hashemi, M. Synthesis by precipitation polymerization of a molecularly imprinted polymer membrane for the potentiometric determination of sertraline in tablets and biological fluids. J. Braz. Chem.Soc., 2012, vol. 23, no 3, p. 392-402.

Sadeghi, H.B., Ebrahimi, S.A., Tamaddon, A., Bozorgvar, F., Afifinia, H., Almasian, N., Mollaei, S. Potentiometric sensing of lamotrigine based on molecularly imprinted polymer / H.B. Sadeghi, S.A. Ebrahimi, A. Tamaddon et al. Electroanalysis, 2011, vol. 23, no. 11, p. 2716-2723.

Liang, R., Zhang, R., Qin, W. Potentiometric sensor based on molecularly imprinted polymer for determination of melamine in milk. Sensors and Actuators B: Chemical, 2009, vol. 141, no. 2, p. 544-550.

Moreira, F.T.C., Freitas, V.A.P., Sales, M.G.F. Biomimetic norfloxacin sensors made of molecularly-imprinted materials for potentiometric transduction. Microchim Acta, 2011, vol. 172, no. 1, p. 15-23.

Prathish, K.P., Prasad, K., Prasada Rao, T., Suryanarayana, M.V.S. Molecularly imprinted polymer-based potentiometric sensor for degradation product of chemical warfare agents: Part I. Methylphosphonic acid. Talanta, 2007, vol. 71, no. 5, p. 1976-1980.

Vishnuvardhan, V., Prathish, K.P., Naidu, G.R.K., Prasada Rao, T. Fabrication and topographical analysis of non-covalently imprinted polymer inclusion membranes for the selective sensing of pinacolyl methylphosphonate – A simulant of Soman. Electrochimica Acta, 2007, vol. 52, no. 24, p. 6922-6928.

Vishnuvardhan, V., Kalyan, Y., Prathish, K.P., Gangadhar, B., Tharakeswar, Y., Prasada Rao, T., Naidu, G.R.K. Imprinted polymer inclusion membrane based potentiometric sensor for determination and quantification of diethyl chlorophosphate in natural waters. Amer. J. Anal. Chem., 2011, vol. 2, p. 376-382.

Prasad, K., Pratish, K.P., Gladis, J.M., Naidu, G.R., Rao, T.P. Design and development of imprinted polymer inclusion membrane-based field monitoring device for trace determination of phorate (o,o-diethyl s-ethyl thiomethyl phophorodithioate) in natural waters. Electroanalysis, 2007, vol. 19, no. 11, p. 1195-1200.

Liang, R.N., Gao, Q., Qin, W. Potentiometric sensor based on molecularly imprinted polymers for rapid determination of clenbuterol in pig urine. Chin. J. Anal.Chem., 2012, no. 3, p. 354-358.

Moreira, F.T.C., Dutra, R.A.F., Noronha, J.P.C., Sales, M.G.F. Myoglobin-biomimetic electroactive materials made by surface molecular imprinting on silica beads and their use as ionophores in polymeric membranes for potentiometric transduction. Biosensors ans Bioelectronics, 2011, vol. 26, p. 4760-4766.

Zook, J.M., Langmaie,r J., Lindner, E. Current-polarized ion-selective membranes: The influence of plasticizer and lipophilic background electrolyte on concentration profiles, resistance, and voltage transients. Sensors and Actuators B, 2009, vol. 136, p. 410-418.

Silva, A.M.S., Pimentel, M.F., Raimundo Jr., I.M., Almeida, Y.M.B. Effect of plasticizer on a PVC sensing phase for evaluation of water contamination by aromatic hydrocarbons and fuels using infrared spectroscopy. Sensors and Actuators B, 2009, vol. 139, p. 222-230.

Yoshimatsu, K., Reimhult, K., Krozer, A., Mosbach, K., Sode, K., Ye, L. Uniform molecularly imprinted microspheres and nanoparticles prepared by precipitation polymerization: The control of particle size suitable for different analytical applications. Analytica Chimica Acta, 2007, vol. 584, p. 112-121.

Gurtova, O.V., Ye, L., Chmilenko, F.A. Potentiometric propranolol-selective sensor based on molecularly imprinted polymer. Anal Bioanal Chem, 2013, vol. 405, p. 287-295.

Chmilenko, F.A., Korobova, I.V., Gurtovaya, O.V., Chmilenko, T.S. Potentiometric membrane sensors for polyvinylpyrrolidone determination. Talanta, 2009, vol. 78, p. 1259-1265.

Zareh, M. Blank membranes versus ionophore-based membranes for the selective determination of H+. Anal. Sci., 2009, vol. 25, p. 1131-1135.

Perez, M.A.A., Marı́n, L.P., Quintana, J.C., Yazdani-Pedram, M. Influence of different plasticizers on the response of chemical sensors based on polymeric membranes for nitrate ion determination. Sensors and Actuators B, 2003, vol. 89, p. 262-268.

Downloads

Published

2014-02-27